Hear from our experts how ThreatSpike works – Watch the Video

Under Attack? Get Support Now.

Threat Detection & Response: How Long Does It Take to Detect a Security Breach?

Threat Detection & Response: How Long Does It Take to Detect a Security Breach?

Threat Detection & Response: How Long Does It Take to Detect a Security Breach?

Summary

  • On average, organisations take around 8 months to identify and contain a breach, while some attackers now reach high-level access in under 3 hours
  • Threat detection and response (TDR) means spotting unusual activity in your systems and acting on it before it causes serious damage
  • Most attacks leave warning signs, such as unfamiliar logins or new admin rights, but a single sign on its own is easy to miss
  • Detection tools raise alerts, so how quickly an attack is spotted depends on whether someone is watching and able to act around the clock


Without fast threat detection and response, attackers can stay inside a business for months.
IBM’s 2026 Cost of a Data Breach report puts the average breach lifecycle, from first intrusion to containment, at 247 days, or around 8 months.

For much of the 247 days, the attacker is already inside, quietly looking around. Every extra day gives them more time to find valuable data, and makes the clean-up harder for the business once they are finally found. Threat detection and response decides whether an attacker gets months inside your systems or only minutes. 

 


 

What Is Threat Detection and Response?

Threat detection and response (TDR) is the process of continuously monitoring your systems for signs of an attack and acting on anything that turns out to be real. Detection means spotting unusual activity. Response covers what happens next, such as locking an account or isolating a laptop before the attacker can go further.

It works alongside threat prevention, which aims to stop attackers from getting in using tools such as firewalls and multi-factor authentication (MFA). No defence stops every attack, so threat detection and response is there for the attackers who still get through. This is the core job of a security operations centre (SOC).

When an attacker signs in with stolen logins or app credentials, as in the ConnectWise Breach, this is sometimes called identity threat detection and response (ITDR). These attacks are among the hardest to spot, since the attacker looks like a trusted user or app.


 

How Is Detection Time Measured?

Detection time is usually measured with dwell time, mean time to detect (MTTD) and mean time to respond (MTTR), explained in the table below. Dwell time is how long an attacker stays inside your systems before anyone finds them, and it’s the clearest single measure of how well detection is working. Getting these numbers down is possible, as IBM found organisations using security AI and automation extensively cut the average breach lifecycle by 65 days.

Measure

What It Means

Why It Matters

Dwell Time

How long an attacker stays in your systems before being found 

The longer it runs, the more time an attacker has to steal data or prepare ransomware 

Mean Time to Detect (MTTD)

The average time it takes to spot a threat

Shows how well your monitoring picks up unusual activity 

Mean Time to Respond (MTTR)

The average time it takes to contain a threat once it is spotted

Shows whether alerts lead to action quickly 

IBM measures these as the mean time to identify and the mean time to contain a breach. In its 2026 report, organisations took an average of 183 days to identify a breach and a further 64 days to contain it.

Attacks that use real logins tend to be the slowest to spot, since the activity can look like a normal employee or a trusted app at work. Some attackers can take control of key systems within hours, so if it takes months to notice them, they have plenty of time to steal data or set up ransomware. 

 


 

What Are the Main Types of Security Breach?

A security breach is any time someone gets into your systems or data without permission. Some types are much harder to spot than others, and the table below shows the most common breaches in computer security and what to watch for.

Type of Breach

How It Happens

What to Watch For

Phishing and Social Engineering

Staff are tricked into clicking a link, opening a file or sharing login details

Unexpected password reset requests and logins from unfamiliar places

Account Compromise (Stolen Credentials)

Attackers sign in with real usernames and passwords stolen or bought elsewhere

Sign-ins at odd hours or from new countries, and new MFA devices 

Lost or Stolen Device 

A laptop or phone with access to company email and files goes missing 

Sign-ins from the device after it was reported lost 

Supply Chain Attack

Attackers get in through a supplier or app you trust, as in the ConnectWise breach

New admin roles or app permissions that were never approved 

Malware and Ransomware

Harmful software is installed to spy, steal data or, with ransomware, lock your files and demand payment 

Files that will not open and security tools being switched off

Insider Threat and Accidental Disclosure 

Someone inside the business misuses their access or sends data to the wrong person by mistake

Large downloads and access to systems outside their role

Unpatched Vulnerability  

Attackers use known software flaws that have not been fixed

Unusual activity on servers that face the internet

For the breaches that use real logins, such as stolen credentials, supply chain attacks and insider threats, behavioural detection is what matters most, covered later in this guide.

When personal data is involved, the ICO says a breach has happened if the data’s confidentiality, integrity or availability has been affected. That means data seen by the wrong people, changed without permission, or lost or locked away, as in a ransomware attack.


 

What Are the Warning Signs of a Cyber Attack?

The UK’s National Cyber Security Centre (NCSC) lists these common signs that a business may be under attack:

  • Slow devices
  • Users locked out of their accounts 
  • Files or documents that cannot be opened 
  • Ransom demands for your data 
  • Reports of odd emails being sent from your domain 
  • Internet searches being redirected 
  • Requests for unauthorised payments 
  • Unusual account activity 


Some of these signs have an everyday cause, such as an old laptop slowing down. Several signs together are far more telling, for example an unfamiliar admin login followed by large amounts of data leaving the business. Linking them up takes someone who knows what normal looks like for your systems. 


 

What Are The Main Threat Detection Methods?

There is no single agreed list of threat detection methods, but most security teams rely on a mix of the approaches outlined in the table below, which compares what each method does well and where it can fall short.

Method

How It Works

Good At

Where It Can Fall Short

Signature-Based Detection

Matches activity against known malware and attack patterns

Stopping known threats quickly 

New attacks, or attackers using real logins with no malware 

Behavioural (Anomaly) Detection 

Learns what normal looks like, often using machine learning, and flags anything that departs from it.

Spotting stolen logins and insiders acting out of character

Needs tuning to avoid false alarms 

Cyber Threat Intelligence 

Compares activity with what is known about current attackers and their methods

Early warning about active campaigns 

Relies on up-to-date information, so brand-new attackers can slip through 

Threat Hunting 

Analysts search your systems for attackers who have not triggered an alert 

Finding quiet attackers who are already inside 

Needs skilled people with time to look

Most effective setups combine several of these, which is often called advanced threat detection. Signature-based tools catch known threats quickly, while behavioural detection and human analysts are better placed to catch an attacker using real credentials. During the PHP2Shell Vulnerabilities, threat intelligence let ThreatSpike’s team identify affected customer systems before patches were released. 


 

Can Threat Detection Systems Automatically Respond to Cyber Threats?

Yes, many threat detection tools can take some actions automatically, such as isolating a laptop or disabling an account. Automated threat response works best for clear, low-risk actions that need to happen fast, while bigger decisions are usually left to an analyst who understands the business. AI threat detection tools can sift through far more activity than a person could, but someone still needs to judge what an unusual alert means.

Attackers are using AI too. In the ConnectWise attack, Microsoft found the group used ARTEX, an AI-driven penetration testing framework, and in some cases the group went from first targeting to privileged cloud access in under 3 hours. At that speed, an alert left until the next working day may already be too late to stop the damage.

The UK’s National Cyber Security Centre (NCSC) expects this to get worse. In November 2026, its chief executive warned that “vulnerabilities that have been tolerated for far too long can now be discovered and exploited” by attackers using AI, at much greater speed and scale. That makes spotting an attack quickly more important than ever. 


 

What Security Tools Can a Business Use to Detect and Stop Threats?

Most businesses rely on several security tools working together, each covering a different part of their systems. The table below explains what the main ones do. 

Tool or Service

What It Does

Endpoint Detection and Response (EDR)

Software on laptops and servers that watches for suspicious activity and can cut off an infected device

Extended Detection and Response (XDR)

Brings together alerts from devices, email, cloud and network, so related warnings are seen as one attack

Security Information and Event Management (SIEM)

Collects logs from across your systems in one place and flags patterns that suggest an attack

Email Security 

Scans incoming email for phishing links and harmful attachments before they reach staff

Deception Technology

Sets up decoy files and accounts that only an attacker would touch, so any contact raises an alert

MFA and Zero Trust

Checks every login and access request, so a stolen password alone is not enough to get in

Managed Detection and Response (MDR)

A service where a specialist team runs detection tools and responds to threats for you

Security Operations Centre (SOC)

The team that provides 24/7 cyber threat monitoring and decides what to do about each alert

You do not need every one of these to be well protected. A sensible starting point for smaller businesses is EDR, email security, MFA, cloud threat detection for services such as Microsoft 365 and central logging (keeping activity records from all their systems in one place). Each tool can flag a problem, but someone still has to respond, and many attackers deliberately strike out-of-hours and bank holidays when fewer people are keeping watch. 

For businesses without their own security team, a managed service that includes response is usually more realistic than building a SOC from scratch.

 



What Can Real Breaches Teach Us About Detection Time?

Two major breaches show two different ways detection can go wrong. In one, the attackers went unnoticed for days. In the other, the alarms went off but no one acted on them.

Change Healthcare Breach (2024): 9 Days Undetected

In February 2024, attackers logged in to Change Healthcare, a US company that handles healthcare payments, using stolen login details. The chief executive of its parent company, UnitedHealth Group, told the US Congress that the account they used had no multi-factor authentication (MFA), according to The Record.

For 9 days, the attackers moved through the systems and stole data without being spotted, and then they launched ransomware. The data of 192.7 million people was affected, according to figures given to the US Department of Health and Human Services.

DHS Breach (2026): Alerts Dismissed as False Alarms

In May 2026, attackers got into a system the US Department of Homeland Security (DHS) uses to share sensitive information with its partners. US senator Mark Warner later warned that its exposure “risks national security”.

According to Nextgov, which saw an internal DHS report, alerts went off on 15 May and 25 May, but staff decided each time that they were false alarms. The breach was only confirmed on 4 June, after the attackers had set up hidden ways back in and stolen login details.

In both cases, the attackers had days inside before anyone acted. Analysts who watch around the clock and know what normal looks like for your systems give you the best chance at spotting those signs and acting within minutes.

An alert only protects you if someone acts on it in time.

 



What Should You Do When You Spot a Cyber Attack?

Act quickly to contain it, then report it where the law requires. The steps are:

  1. Contain the threat. Isolate affected devices or accounts so the attacker cannot go further, keeping evidence where you can.
  2. Keep a record. Save logs and note what happened and when, as this helps the digital forensics investigation and any report.
  3. Get help. In the UK, the NCSC advises calling and reporting it to Action Fraud on 0300 123 2040 (in England, Wales and Northern Ireland) if you are under a live attack, and significant attacks can be reported online at reports.ncsc.gov.uk. In the US, businesses can report incidents to CISA or their local FBI field office. If you need urgent help from our team, you can also contact us through our Under Attack form. 
  4. Check whether you need to report it. In the UK, if personal data is involved and the breach meets the threshold for reporting, the ICO says you must report it within 72 hours. In the US, each state has its own breach notification law, and listed companies must disclose material cyber incidents to the SEC within 4 business days of deciding an incident is material.
  5. Fix the cause. Find out how the attacker got in and close the gap so it cannot happen again.

Spotting a breach early also makes these steps far easier. A breach that went unnoticed for months is much harder to investigate and report, since there is far more activity to look back through.



How ThreatSpike Delivers Threat Detection and Response

At ThreatSpike, security is built into the same AI-managed platform that runs your IT, so our SOC already knows your devices and what normal looks like for your business. When something changes, such as a new admin role or a sign-in from an unfamiliar place, it stands out quickly. There is no handover between an IT provider and a separate security provider while an attacker is inside. 

Our agents on each device give continuous visibility into user and machine behaviour, and decoys and tripwires catch attackers moving around inside. The platform processes 40 billion events a day using detection algorithms built in-house.

Our managed SOC monitors endpoints, cloud, network, email and web apps 24/7. When it spots a threat, the platform responds automatically within 2 to 5 minutes, against an industry standard of 15 to 60 minutes, and an analyst then investigates and decides the next steps. Incident response is unlimited and included in the same fixed monthly price, so there is never a call-out fee to weigh up.

As one customer put it in a G2 review: “I find ThreatSpike’s 24/7 monitoring service incredibly useful as it helps catch cyber attacks early and ensures that our systems remain secure. Their security checks and quick notifications give us confidence that we’re proactively preventing cyber threats.”

Attackers will keep getting faster, so the question worth asking is how long it would take your business to notice an attack. With the right monitoring in place, that time can come down to minutes.

Book a demo to see how ThreatSpike’s SOC spots and stops attacks around the clock. 

Related posts